Jump to content
 
ZenMalibu

In Hell with Vive Cosmos External Tracking Faceplate

Recommended Posts

I purchased a VIVE Cosmos External Tracking Faceplate on 5/14820 and have never been able to get it to work. This despite several chat sessions with HTC support that have now run many hours. Currently on the  third VIVE Cosmos External Tracking Faceplate replacement, none of which have fixed the issue. The first two replacements were apparent new units, the third and last unit was in a plastic bag, Vive kept the Vive Cosmos External Tracking Faceplate box. Not sure that was a repair attempt on the second replacement. 

The problem is that every time the External Tracking Faceplate is installed, I get a headset not detected error message.. Once I remove the External Tracking Faceplate and reinstall the original Cosmos inside out faceplate the headset and everything else works fine. 

I have the original base stations and controllers from my original Vive headset. As a lot of Vive users have commented the tracking was better with the old base stations and controllers, so the External Tracking Faceplate looked like a good purchase. I had asked the following question of four HTC support staff and never got the same reply -  with the Vive Cosmos External Tracking Faceplate installed. isn't this essentially the same as the Vive Cosmos Elite, except without the SteamVR Version 2 Base Stations. If that is the case, can you run the Vive Cosmos Elite product set up under Device Setup using two Version 1.0 Base Stations? The last HTC support rep agreed, and we used the Vive Cosmos Elite devise setup. Which still doesn't work with the External Tracking Faceplate. Interestingly, theVive Cosmos Elite setup is currently working fine with the original Cosmos faceplate.

 

With HTC support and on my own, I have followed the same steps over and over with the same results (which I guess would be the definition of insanity)-

-Removed the Vive Cosmos External Tracking Faceplate and reinstalled the original Cosmos faceplate.

-Did a full reset of the headset, all packages were successfully loaded and installed.

-Reinstalled the Vive Cosmos software in Device Setup and synced the two Cosmos controllers.

-Performed a full room setup.

-The result was that the Cosmos headset worked fine with the original Cosmos faceplate.

-Then I removed the original Cosmos faceplate and re-installed the Vive Cosmos External Tracking Faceplate, all sides tight to the headset (I have had plenty of practice with installing faceplates).

-With the Vive Cosmos External Tracking Faceplate installed, SteamVR was again unable to detect the headset.

If anyone has any thoughts on this issue they would be most appreciated. My HTC support chat sessions are attached. ThanksHTC Support Chat.docx

HTC Support Chat.docx HTC Support Chat.docx

  • Like 1

Share this post


Link to post
Share on other sites

You haven't tried one most important step. Erase your whole PC and clean install again with the latest driver and make sure you updated to latest Window 10 build. Never use the one come with the disc. Go to the website to install latest motherboard package/driver and nvidia driver, etc.

 

Edited by lam0218

Share this post


Link to post
Share on other sites

@ZenMalibuif you are still not able to fix the issue by updating the USB driver
Contact me in private msg, I will help you out.

Share this post


Link to post
Share on other sites

Please sign in to comment

You need to be a member in order to leave a comment

Sign in

Already have an account? Sign in here.

Sign In Now

×
×
  • Create New...