lalalice

happy information From WSR-1800AX4S (IEEE 802.11ax: 1201Mbps (80MHz 2x2) Result of changing to WXR6000AX12S (IEEE 802.11ax: 4803Mbps (80MHz 8x8, 160MHz 4x4) can now connect to vive business streaming via wifi. If Japanese user and cannot connect to wifi, please refer to it.

Uncheck the experimental tcp mode, 　and check ping The IP address of my computer is 192.168.11.2 And the IP address of focus3 is 192.168.11.7 I confirmed that. PING has shown that it can communicate. Nonetheless, the wifi connection displayed "Error 912". Unfortunately on the Japanese support page If "Error 912" is not resolved, please plug in the USB cable. Only the solution to give up the wifi connection is shown. @Yuuya Masada

Unfortunately my FOCUS 3 keeps refusing wifi streaming.

Yes, this is definitely Program Data.

hmm...I did that, but nothing changed. (No improvement)

1.can select VR Server (displayed on vive business streaming "VBS server 192.168.0.14) 2. After a while after selecting, "912 error" 3. Return to the selection screen. The VR Server is still visible there. (1 to 3 loops are possible) Additional Information The IP address of focus3 is 192.168.0.8. The personal computer is connected to WSR-1800AX4S by wire.

I tried to get the log with an error, but there was no response when I connected the USB in that state. By restarting focus3 from power off, USB responded and I was able to get the attached log. I hope this is valid. Please let me know if you have any other necessary information. I will provide it. RRLog_20211223_213921.zip

With this fix I can join BETA again. ・ VRCHAT by USB streaming cable is very comfortable (In the previous version, it was often returned to the vive lobby) thank you. However, even with this version, it was not possible to connect via wifi. Probably an environmental issue. I consulted with Japanese support, but I couldn't solve this.

Split post 3/4 & 4/4 RRLog_20211124_205457.003 __RRLog_20211124_205457.exe

Split post 2/4 RRLog_20211124_205457.002

Since it exceeded the 48MB size, it was split　Split post 1/4 RRLog_20211124_205457.001

use this version, an error will occur and you will not be able to use it. 1.05.1a works normally in the same environment. can use it.(However, it can only be connected via a USB cable. It cannot be connected via wifi.)